IS 18256 covers GFRP bars for concrete reinforcement. For road and bridge works, IRC 137 gives application guidance. Always confirm the current edition before citing either.
Resources
- Resources
- How to Specify GFRP Rebar in a Tender or BOQ: A Practical Guide
4
Nov'26How to Specify GFRP Rebar in a Tender or BOQ: A Practical Guide
A GFRP rebar specification that simply states "GFRP rebar as approved by the engineer" leaves too much room for interpretation. It can result in non-comparable bids, substandard materials entering the project, and disputes during site inspection.
A well-defined specification eliminates these uncertainties by clearly stating the applicable standards, guaranteed material properties, testing requirements, and acceptance criteria.
This guide is intended for structural consultants, project engineers, quantity surveyors, and procurement teams evaluating GFRP reinforcement for construction projects. It explains which standards to reference, what material properties to specify, how to establish quality and acceptance requirements, and how to prepare a BOQ item. It also includes a sample specification clause that can be adapted for project requirements.
If you are new to the material, start with our posts on what GFRP is.
Why GFRP Needs a Different Specification From Steel
Steel is specified by grade. For example, specifying Fe500D establishes the applicable requirements for yield strength, ductility, chemical composition, and testing under the relevant standard.
GFRP does not have a directly equivalent grading system. Its performance depends on several material and manufacturing variables, making it important to define the product requirements within the project specification itself.
There are three important reasons for this:
- Material properties depend on composition and manufacturing. Fibre type, resin system, fibre content, and manufacturing processes such as pultrusion influence the bar's tensile strength, durability, and bond performance. Consequently, two bars with the same nominal diameter may have significantly different properties.
- Its structural behaviour differs from steel. GFRP behaves linearly and elastically until failure. Unlike steel, it does not yield, and its elastic modulus is generally lower. Consequently, structural design often requires particular attention to crack width, deflection, and serviceability. Read more about these GFRP design considerations.
- GFRP cannot be bent or reshaped on site. GFRP bars must be manufactured into the required shapes before delivery. Bends, hooks, and other configurations must therefore be included in the drawings and approved before production.
The specification must therefore go beyond simply identifying the reinforcement material. It should establish the applicable standard, product characteristics, guaranteed performance values, and verification procedures.
Standards to Cite in a GFRP Rebar Specification
For Indian construction projects, the relevant Indian standards should form the primary reference, with international standards used as supplementary references where necessary.
Relying only on a conventional steel reinforcement standard, or failing to identify a GFRP-specific standard, can create ambiguity during procurement and quality inspection.
Standard |
Scope |
Recommended application |
|---|---|---|
| IS 18256 | GFRP bars for concrete reinforcement in India | Product requirements and testing for applicable project types |
| IRC 137 | Guidelines for GFRP reinforcement in road and bridge structures | Highways, bridges, approach slabs, crash barriers |
| ACI 440.1R | Guide for the design and construction of concrete reinforced with FRP bars | Structural design where ACI guidelines are adopted |
| ASTM D7957 | Specification for solid round GFRP bars for concrete reinforcement | Supplementary product requirements and testing |
| CSA S807 / S806 | FRP reinforcement product specifications and structural design | Additional international reference for product and design requirements |
The appropriate combination depends on the project type and design framework.
- For highways and bridge projects, IS 18256 should be referenced for product requirements, alongside IRC 137 for application and design guidance.
- For buildings, marine structures, and industrial projects, IS 18256 can be combined with the structural design code adopted by the consultant.
Where the primary Indian standard does not address a particular test or requirement, the tender should explicitly identify the supplementary international test method and acceptance limit. This avoids leaving testing decisions to individual suppliers or site personnel.
What to Include in a GFRP Rebar Specification
A complete specification should define measurable requirements rather than relying on general product descriptions or manufacturer datasheets.
Most importantly, specify guaranteed minimum or maximum values, as applicable, instead of typical values. Typical figures represent reported performance and may not constitute a contractual commitment from the manufacturer.
The following table outlines the key parameters to include, along with commonly referenced test methods. The applicable test methods and their equivalence with IS 18256 should be verified before finalising the tender.
Parameter |
What to specify |
Common test reference |
Why it matters |
|---|---|---|---|
| Material composition | Fibre type (ECR or alkali-resistant glass, for example) and resin type (such as vinyl ester) | Manufacturer declaration | Fibre and resin decide durability in alkaline concrete |
| Diameter and tolerance | Nominal diameter and permissible dimensional variation in mm | ASTM D7957 | Affects cross-sectional area and bond performance |
| Surface profile | Sand-coated, ribbed, or helically wrapped finish | Visual and dimensional check | Influences the bond between reinforcement and concrete |
| Tensile strength | Guaranteed minimum tensile strength in MPa for each diameter | ASTM D7205 | Determines the tensile capacity used in structural design |
| Modulus of elasticity | Guaranteed minimum modulus in GPa | ASTM D7205 | Influences crack width and deflection |
| Fibre content | Minimum fibre content by weight in percentage | ASTM D2584 or D3171 | Helps verify material composition and manufacturing consistency |
| Bond strength | Minimum bond strength in MPa | ASTM D7913 | Influences development length and load transfer |
| Transverse shear | Minimum transverse shear strength in MPa | ASTM D7617 | Relevant for dowels, connections, and cross-loading conditions |
| Water absorption | Maximum permissible absorption in percentage | ASTM D570 | Indicates moisture absorption characteristics and material quality |
| Cure / Glass transition temperature | Minimum glass transition temperature (Tg) or specified degree of cure | ASTM D7028 | Helps assess curing and thermal performance |
| Alkali resistance | Minimum strength retention after specified conditioning | ASTM D7705 | Provides evidence of resistance to alkaline concrete environments |
| Length and supply form | Standard lengths, dimensional tolerances, and straight or pre-formed supply | Dimensional check | Reduces cutting waste and site-level rework |
| Pre-formed shapes | Approved shop drawings for bends, hooks, and other custom configurations | Drawing and dimensional approval | Ensures correct shapes are manufactured before delivery |
The table identifies the parameters that should be addressed, but it does not prescribe universal numerical limits. These values must be established based on the applicable standard, structural design requirements, bar diameter, and project exposure conditions.
Consultants should also require bidders to submit a technical compliance sheet showing their guaranteed values against every specified parameter. This makes it easier to compare manufacturers and identify deviations before awarding the contract.
Quality Assurance and Acceptance Criteria
A technically sound specification is only effective when the supplied material can be verified against it.
The tender should establish clear quality assurance and acceptance procedures before procurement begins. Consider including the following five requirements:
- Manufacturer test certificates: Require batch-specific test certificates covering the specified material properties. Testing should be conducted by an NABL-accredited laboratory, wherever applicable, with the relevant test methods and results clearly documented.
- Batch identification and traceability: Every bar or bundle should carry identifiable markings, including manufacturer details, nominal diameter, batch number, and manufacturing date. This allows site deliveries to be matched with their corresponding test certificates.
- Independent sampling and testing: Define the sampling frequency based on batch size or supplied tonnage. Specify who will collect the samples, which tests must be performed, and which independent laboratory will conduct the verification. Tensile strength, modulus of elasticity, and fibre content are common baseline checks.
- Rejection and retesting procedures: Establish what happens when a sample fails to meet the specified requirements. The procedure may include retesting additional samples, rejecting the affected batch, or requiring replacement at the supplier's expense. Clearly identify responsibility for testing and retesting costs.
- Manufacturer pre-qualification: Request previous project references, manufacturing capacity, quality control procedures, and details of the manufacturing process. This helps assess whether the bidder has the production capability and quality controls required for the project.
A standardised supplier compliance sheet should accompany the technical bid. It should list every required parameter, the specified limit, the manufacturer's guaranteed value, and supporting test documentation.
This creates a clear basis for technical evaluation and makes suppliers accountable for the properties they offer.
How to Write the GFRP Rebar BOQ Item
The BOQ should accurately reflect the reinforcement shown in the approved drawings and bar bending schedules. It should also clearly define what the quoted rate covers to prevent variations and disagreements during execution.
The following five practices can help:
- Choose the appropriate measurement unit. Use kg or running metres, depending on the project measurement method and approved BOQ format. The unit should be consistent with the drawings and quantity calculations. Our guide on GFRP rebar price per kg in India explains why comparing GFRP and steel on a per-kilogram basis can be misleading.
- Create separate BOQ items for each diameter. Avoid combining different bar diameters under a single item. Separate entries make pricing, quantity verification, and procurement comparisons more transparent.
- Define rate inclusions and exclusions. Specify whether cutting, pre-forming, wastage, packaging, transportation, unloading, and delivery to site are included in the quoted rate.
- List accessories separately. Spacers, chairs, suitable ties, and couplers, where required, should have separate BOQ entries. Conventional steel tie wire may introduce corrosion into an otherwise corrosion-resistant reinforcement system.
- Avoid direct weight-based conversion from steel. GFRP has a different density, elastic modulus, and structural behaviour. Steel reinforcement quantities cannot simply be replaced with equivalent GFRP quantities by weight or cross-sectional area. Quantities must be calculated using a structural design specifically developed for GFRP.
Sample BOQ Item
| Item | Description | Unit | Quantity |
|---|---|---|---|
| 1 | Supply of GFRP rebar of [diameter] mm conforming to IS 18256 and project specification clause [number], including pre-formed shapes as per approved bar bending schedule, applicable quality test certificates, packaging, and delivery to site | [kg or m] | [As per approved BBS] |
The description should be expanded wherever necessary to specify installation, accessories, unloading, and other contractual responsibilities.
Common Mistakes to Avoid When Specifying GFRP Rebar
Even when a project specifies GFRP reinforcement, certain gaps in the tender can create procurement and execution challenges.
Here are six common mistakes to watch for:
- Referencing only steel standards: IS 1786 covers conventional steel reinforcement, not GFRP bars. The specification should identify IS 18256 or another applicable GFRP product standard.
- Replacing steel with equivalent weight or area: GFRP has a different modulus of elasticity and failure behaviour. It requires an independent structural design rather than a direct substitution.
- Accepting typical manufacturer values: Typical values do not necessarily represent guaranteed product performance. Always request guaranteed minimum or maximum values with supporting test reports.
- Ignoring batch certificates and traceability: Without proper batch identification, it becomes difficult to verify whether the delivered material corresponds to the tested product.
- Allowing bending at the construction site: GFRP bars must be manufactured in the required shapes. Heating or mechanically bending straight bars on site can damage the reinforcement.
- Overlooking cover, lap, and development length: GFRP reinforcement requires design-specific detailing. These requirements should be established in the structural drawings and specifications rather than left to site-level interpretation.
GFRP Rebar Tender: Pre-Tender Checklist
Before releasing the tender, consultants and procurement teams should verify that all essential product, design, and quality requirements are covered.
Use this checklist as a final review:
- GFRP product standard specified (IS 18256, with IRC 137 for applicable road and bridge projects).
- Structural design completed specifically for GFRP reinforcement.
- Fibre type, resin system, and surface profile clearly identified.
- Guaranteed minimum tensile strength and modulus specified for each diameter.
- Fibre content, bond strength, water absorption, and alkali resistance requirements included.
- Batch-specific test certificates from appropriately accredited laboratories required.
- Manufacturer identification and batch traceability established.
- Sampling frequency, independent testing procedures, and rejection criteria documented.
- Bent shapes and custom configurations approved before manufacturing, with no site bending permitted.
- Separate BOQ entries provided for each diameter, with clear inclusions and exclusions.
- Accessories such as spacers, ties, chairs, and couplers listed separately.
- Supplier compliance sheet, manufacturing details, and relevant project references requested.
Conclusion
Specifying GFRP rebar in a tender is not simply about replacing steel reinforcement with a corrosion-resistant alternative. It requires a clear understanding of the material's properties, structural behaviour, applicable standards, and manufacturing requirements.
A well-prepared specification makes supplier evaluation more transparent, improves quality control, and reduces the likelihood of disputes during procurement and execution.
For consultants and contractors considering GFRP reinforcement, the most important principle is straightforward: specify measurable performance requirements, demand verifiable test evidence, and ensure the reinforcement is designed specifically for GFRP.
This approach helps ensure that the material supplied to the project meets the intended design requirements and performs as expected throughout its service life.
Frequently Asked Questions (FAQs)
Find clear answers to the most common queries.
-
What standard applies to GFRP rebar in India?
-
How do I write a BOQ item for GFRP rebar?
Use one line per diameter, in the same unit as the bar bending schedule. State the standard, and say whether the rate includes pre-bending, wastage, packing and delivery. List spacers, ties and couplers as separate items.
-
Can I replace steel bars with GFRP bars of equal area?
No. GFRP has a lower modulus and does not yield, so the section must be designed for GFRP. Quantities should come from that design.
-
What test certificates should I ask for?
A batch-wise certificate from an NABL-accredited laboratory covering tensile strength, modulus, fibre content, bond strength, water absorption and alkali resistance, plus independent sampling at site or lab.
Subscribe to Our Newsletter
Get updates on products, research collaborations, and new developments in FRP technology.
Subscribe to Our Newsletter
Subscribe our newsletter and get notifications to stay update